The multiple spindle electric mast manufactured by Homall is a professional-level lifting equipment designed for industrial heavy-load and high-precision operation scenarios. Unlike the conventional mast with a single screw rod and steel wire rope linkage found on the market, it adopts a multi-group concentrically nested screw rod synchronous transmission architecture. Each section of the mast is equipped with an independent dedicated driving screw rod. The large and small tubes are nested layer upon layer, and the screw rod structures are synchronously aligned, forming an integrated mechanical transmission system.
The multi-spindle electric mast relies on pure mechanical screw rod transmission to replace pneumatic, hydraulic, and single-rope transmission schemes. It eliminates the drawbacks of air pressure fluctuations, oil leakage, and elastic shaking of the rope. The lifting control can achieve precise adjustment to the millimeter level. In heavy-load conditions, the mast body's rigidity does not decrease, and the posture remains stable without deviation. It is equipped with an exclusive key slot anti-rotation tube structure, which locks the equipment's orientation and angle throughout the process. It is suitable for military-grade harsh outdoor conditions and can operate stably in long-term high and low temperatures, sand and dust, extreme cold and heat environments. It mainly meets the industrial-grade lifting requirements of high precision, large load capacity, and high durability, and is widely used in professional scenarios such as precise monitoring, heavy-load equipment mounting, and fixed base station networking.
This equipment is an industrial heavy-duty precision model. During operation, it must strictly adhere to the rated load standard. Long-term overloading of the equipment is prohibited to avoid uneven force distribution in the multi-thread synchronous transmission structure, which may cause biting wear and accuracy deviation.
The lifting process of the equipment is multi-section synchronous operation. It is strictly forbidden to manually intervene by pressing or pulling the frame during the entire process. Otherwise, the accuracy of the synchronous biting of the screw rods will be damaged, resulting in operational stalling and segment misalignment.
When deployed outdoors for a long time, it is necessary to regularly check the sand, dust, and debris in the gaps of the screw rods and key slots. Timely cleaning and maintenance should be carried out to keep the transmission structure smooth and avoid the accumulation of impurities that cause mechanical wear.
When the equipment is in a static operation state, it is recommended to keep it vertically erected to reduce long-term unilateral strong wind lateral force. This helps protect the overall concentric structure and load stability.
After completing the lifting operation, avoid remaining at the extreme highest height for a long time. If not in use for a long time, it is recommended to fully store it to reduce the long-term fatigue wear of the transmission structure and extend the equipment's service life.
It is strictly prohibited to disassemble the multi-group synchronous screw rod structure privately. Non-professional disassembly will damage the ratio of multi-axis synchronous transmission, leading to equipment scrapping and operational failures.
The core differences lie in efficiency and stability. A single-threaded mast lifts and lowers section by section, which is slow and prone to shaking under heavy loads. This model, with multi-threaded synchronous extension, has a faster lifting and lowering speed, better segment synchronization, stronger rigidity under heavy loads, and no shaking. It offers overall superiority in precision and operational efficiency.
No. The entire machine has passed military-grade weather resistance tests. The structure is resistant to sand, able to withstand high and low temperatures, and resistant to corrosion. It uses pure mechanical transmission without the risk of air leakage or oil leakage. With proper maintenance, it can operate continuously day and night for a long time, and the failure rate is extremely low.
OK. The multi-spindle precision mechanical interlocking transmission ensures full-range continuous height locking, with precise positioning to the millimeter level. It remains stationary without sliding or shifting, fully compatible with high-precision operation scenarios such as precision sensing and radar monitoring.
The exclusive key-slot guiding structure provides physical limitation for anti-rotation, rather than simple friction limitation. The mechanical structure is stable and durable, and can firmly fix the equipment orientation even during long-term lifting and under wind conditions, without causing angle deviation.
It is mainly targeted at heavy-duty, high-precision, and long-term duty scenarios, suitable for industrial precision monitoring, military communication deployment, outdoor fixed base stations, heavy-duty security equipment mounting, and extreme environment outdoor operations, which have high requirements for stability and load capacity.
The overall maintenance-free threshold is low. Only regular cleaning of gaps and debris and inspection of the transmission lubrication status are required. The multi-spindle wear-resistant structure design has a long service life, and compared with pneumatic and hydraulic models, the daily operation and maintenance costs are lower.
Address
Room B, 16/F, Euro Trade Centre, 9 Chiu Lung Street, Central, Hong Kong
Tel
